After a long time I have started something again. This time it goes to England.
It is a Morris CS 9 amoured carvon Planet model. It is a cast of the model of the desert version.
Since I could not cast all parts I made many parts scratch, some are from the grab box. I took the differential, cardan shaft and mudguards from there. The wheels are also cast from a Morris 15 cwt from IBG.
About the kit.
Very nice resin kit with 3 D printed parts, a nice etching board. Caution !!!
The decal for the Italian version is wrongly translated.
Here are the first steps to build the Morris.
![Image](https://i.postimg.cc/tT5PY2wk/20240210-142011.jpg)
![Image](https://i.postimg.cc/sD8WQB6k/20240213-201814.jpg)
![Image](https://i.postimg.cc/9fPwnLm2/20240213-201833.jpg)
The floor assembly would be very difficult to cast. At least without a vacuum pump. That's why I built it scratch. The process itself was not difficult. I had the original part as a template.
The orange part contains the impression of the engine.
![Image](https://i.postimg.cc/wBsYqryK/20240216-082850.jpg)
![Image](https://i.postimg.cc/0jk4wXQy/20240216-082908.jpg)
![Image](https://i.postimg.cc/sX981C3L/20240222-115224.jpg)
Part 2 will follow shortly.
Best wishes
Jürgen