FreG - fantastic!
Last night , early this morning I do the rigging and the steering mechanism. Ok, the simple way, no pulley as an example. But with the diagonal cable (profile) to the aileron I do not see there it was fixed. In your superb demo
at 1.27 I do understand immediately who. It is coupled with the steering cable from the cockpit pasing the last strut.
How does the up and down flaps at the upper and the under wing (4 pcs in all) are accessed?
I know and understand the function of the U connection at the top wing. The connection cable to the down flaps. Got it.
The underside (down flaps) link I know too. There are openings in the downside of the down wing (front). Are these the link from the cockpit to steer the whole mechanism of all four flaps? Logically there is no other option.
The interesting part is now. If you can understand my English explanation without drawings.
Rise Of Flight:
First test of the steering function. Start the engine wit a lot of smoke. After a few meters the tail rise up.
The optical slow speed if the plane do a turn from the point of the observer on the Airfield.
On and off of the motor for the landing process.
For the Moderators:
I am sorry that it is right now less with figures. As soon as possible I will got back to figure painting.
Thank you in advance for being so cooperative.