It has been years since I did one of these walking, reading, hot pinning, plastic sticking, type fixing of problems especially this 58 year old fault in these tiresome Drummers. Well they certainly wore me out trying to stick them because the drum being round there was very little part of it touching the figure.
Plan A was to paint the figures first then fix the drum_________ a big BIG! EROR!
So plan B, involves pins and greenstuff.
To fix those drums in place.
There is still glue on one figure applied, applied and applied, until whoever that person was gave up on the trying to stick the tiny darn things on,and eventually the box came my way via E Bay!
Two sets in the plastic bag.
The fault being the fact the holes are to large and the plastic peg to small and way to short on the drums. So I`m going to fill the hole with plastic,cut the peg off the drum an hot pin a hole into it. I have done this type of hot pinning hundreds of times,but this time I intend to place a pin into the hole in the figure. It will be placed pinhead first in the hole and the the hole will be filled in with green-stuff! So it will be well anchored into place.
When the green-stuff is hard I`ll shorten the pin so the drums will perfectly fit good and tight upon it . That`s the plan.
Part two will show the results. Thanks for looking.