Work in Progress

Ostwind III to Stug III C

Posted by JueHue on 13 May 2022, 03:29

Good

My latest work started with a bad purchase .
I saw the Revell Ostwind in Ka Li. At home I noticed that it was the prototype, PIII instead of PIV. The kit had been stored in the cellar for a while. Now it's my turn. I decided not to build paper tanks. Now comes a
The turret will be put on a PIV sometime. The chassis will become an
assault gun. Real kit bashing. I have taken stock in my spare parts store. Fits, everything there.
Revell lower hull, Trumpeter upper hull. Lots of small parts from various manufacturers. The only thing I have to carve myself is the rear wall of the tank superstructure. Except for a few small parts I have looked for everything together, what is missing is scratched.
First I glued the Revell hull. Of course I drilled the holes for the emergency exits in the track area according to the instructions. And closed them again. Then I did some adjustment work and a bit of filling on the PZ superstructure. I will probably saw out the hatches.
Here are a few pictures.
Hatches sawed out and latches made.
Sanded everything nice and thin. Cut and glued the old etched parts for the locking mechm.(thank you Paul ) made the fighting compartment floor and glued it.anis


Image

Image

Image

Image

[url=https://abload.de/image.php?img=dscf44344wj0y.jpg]Image[/url

As the hatches are now open you can see the protective frame for the tube return.I have partly indicated it or reproduced it from wire and plastic. The tracks are already painted except for the ageing.
Next up is the SFL scope and the commander's scissor scope, then the lid on the Pz hull. A few parts still have to be adapted, such as the exhaust, antenna holder and some other things.

Have a nice day
Jürgen
JueHue  Germany
 
Posts: 145
Member since:
25 Dec 2020, 13:01


Posted by tullo on 13 May 2022, 19:19

hello
the palms are homemade from wire, zewa kitchen towel, and structure paste, wood glue and artificial silk flowers.
greetings
User avatar
tullo  Germany
 
Posts: 288
Member since:
06 Jun 2020, 01:56

Posted by OwenChpw on 19 May 2022, 13:56

Well, keep going, a bad purchase can still lead to a great project!
User avatar
OwenChpw  Australia
 
Posts: 572
Member since:
14 Jan 2020, 06:46

Posted by JueHue on 25 May 2022, 17:08

Hi
Here I would like to show the latest pictures of the development of the STUG III C/D. Almost all parts are installed. The winter camouflage has now been applied and it has already snowed a bit. Unfortunately I don't have any good photos of it. More after our vacation.

Image

Image

Image

Image

greetings Jürgen
JueHue  Germany
 
Posts: 145
Member since:
25 Dec 2020, 13:01

Posted by Peter on 25 May 2022, 22:09

Looking good so far Jürgen! :thumbup:
User avatar
Peter  Belgium

Moderator Moderator
 
Posts: 21394
Member since:
25 Mar 2008, 18:51

Posted by JueHue on 12 Jun 2022, 20:14

Teil III
Now I'm back from vacation. It snowed a little during Stug. It is complete except for a few parts. As a test, I applied some snow to the drive, it is still missing on the structure. I always use sodium bicarbonate soda for the snow. Fixed with Mig fixer. I also applied some painting with oil paints. In the next few days I will attach all the parts and treat them in color.
Now the pictures.

Image

Image

Image

Image

Image

Image
greetings Jürgen
JueHue  Germany
 
Posts: 145
Member since:
25 Dec 2020, 13:01

Help keep the forum online!
or become a supporting member


Return to Work in Progress